Many home owners face the challenge of refinishing wood bathroom floors. This may seem like an extremely time consuming project. It is definitely one that is most often faced with complete dread. The good thing is that it is not the individual that does the most work when it comes to this project. Usually, it is done by a sander. Generally, this instrument is rented and you must purchase sand paper to go on it. You should also purchase a mask that will prevent you from inhaling the dust that is kicked up when refinishing the floor. Safety goggles are another item that should be purchase. Here, you will discover how to refinish wood bathroom floors.
How to Refinish Wood Bathroom Floors?
The first step when it comes to refinishing any type of floor is to ensure that the area is clean. You should identify any repairs that may need to be done to the area. This includes replacing pieces that may warped or have moisture damage. You should observe the floor carefully to ensure that there are no nails or other objects sticking up that may result in damage to the sandpaper that is used to refinish the area. If the floor contains any type of wax or other substances, it is important that this is cleaned away completely.
Once you have cleaned the floor thoroughly, you should start sanding it. It is best to start with what many refer to as a “rough” sanding. This is where you start in a corner of the room and then work outward into the center of the room. While doing this, it is important that you move the sanding machine in such a way that it is slow and steady. You should never stop the sander when it is turned on. This result in the floor becoming uneven. Once the floor has been completed, it is important to ensure that you sand the border of the floor. This normally has to be done with a handheld sander.
Once the floor, corners, and borders have all been sanded appropriately, it is time to clean all over again! This is a very important part when it comes to refinishing wood bathroom floors, so, be certain that it is not neglected. You should first use a broom to sweep away the debris that has been caused as a result of the sanding. Once this has been done, you should take a vacuum cleaner – a handheld unit is fine – and get what is left over. Many individuals take it a step further and clean with a dust mop. This is a great way to tackle any and all areas that have not yet been dealt with.
The next step that is required when it comes to refinishing wood bathroom flooring is staining the wood. It is important to take special care when choosing a stain for your bathroom floor. You should select a stain that is most appropriate for the wood on your bathroom floor. Once you have the right one selected, it is important to follow the instructions on the can to ensure that you are staining evenly and appropriately. Once the stain has dried, it is time for the next step.
The refinishing step has finally arrived! You should purchase a finish, or varnish, that is appropriate to the type of wood that is on the floor of your bathroom. You should ensure that you apply the varnish slowly and evenly when refinishing the wood. If you fail to do this, it will leave streaks and will look really messy. You must understand that the varnish must penetrate the wood that it is being placed on. If you fail to allow it to do this, you will find that the varnish will wipe away easily. Once you have refinished the wood floor in the bathroom, it is important to purchase a water resistant sealant that can be used to protect the wood from moisture. Once the varnish is dry, you should apply this sealant. Once everything is dry, pat yourself on the back…you have now successfully refinished the wood bathroom floor!